800-334-0227 jimglaze@thomco1.com

THOMCO offers a variety of AIA and continuing education seminars to provide you with CEU credits or simply an in-depth exploration of specific subjects, systems or applications. We can participate in free flowing design charettes during design development to assist your team in developing direction and we can intensely focus on detailing and specification issues that positively impact your design on specific projects. We can also set up in your conference room for an informal introduction to all that THOMCO offers during early morning arrival time or lunch.

Our deep technical knowledge base and experience can add significant value to your projects. We strongly encourage you to engage us.

Our deep technical knowledge base and experience can add significant value to your projects. We strongly encourage you to engage us.

XRequest an AIA CEU Program

6 + 1 =

Our deep technical knowledge base and experience can add significant value to your projects. We strongly encourage you to engage us.

XRequest a Meeting

7 + 3 =

AIA CEU Offerings

Provider:  American Hydrotech    www.hydrotechusa.com

Program Title:  Adding Resiliency on the Roof:  Vegetated Roofs and Blue Roofs

Provider Number:  J379

Presentation Number:  000074

Length:  60 min.

Credits:  1 LU

HSW (Health, Safety, Welfare):  Yes

This program introduces audiences to the many benefits provided by vegetated roofs and blue roofs.  The course will review how both vegetated and blue roofs can be incorporated into stormwater Best Management Practices (BMPs) on projects along with the technical advantages of employing either individually or combined.  In addition, recent technological developments will be shown on how to implement blue roofs as a cost savings opportunity on a project.  The course also covers typical components, design considerations and installation methods.

Provider:  American Hydrotech    www.hydrotechusa.com

Program Title:  Waterproofing with Hot-Applied Rubberized Asphalt Membranes

Provider Number:  J379

Presentation Number:  0024

Length:  60 min.

Credits:  1 LU

Tangible and practical knowledge on specifying detailing and installing hot-applied rubberized asphalt in horizontal and vertical applications.  Benefits of hot-applied rubberized asphalt, such as 100% bond to the substrate, absence of seams, ease of detailing and product thickness, are presented.

Provider:  American Hydrotech    www.hydrotechusa.com

Program Title:  Protected Membrane Roofing with Hot-Applied Rubberized Asphalt Membranes

Provider Number:  J379

Presentation Number:  0014

Length:  60 min.

Credits:  1 LU

Tangible and practical knowledge on specifying, detailing and installing protected membrane roof (PMR) systems utilizing hot-applied rubberized asphalt membranes.  PMRs (also called IRMAs) place the waterproofing membrane below the insulation layer.  The program outlines many of the benefits of inverted roofs, including protection of the membrane from physical abuse and weathering, and increased life expectancy of PMRs over conventional roofs.

Provider:  ALT Global       www.altglobal.com

Program Title:  Roofing, Waterproofing, and Traffic Surfacing:  Common Sense Solutions Using PMMA Liquid-Applied Systems

Provider Number:  T158

Presentation Number:  369RFG

Length:  60 min.

Credits:  1 LU

HSW (Health, Safety, Welfare):   Yes

Understand the advantages of high-performance liquid-applied systems.  When considering life-cycle cost, the most durable solutions become even more attractive.  Learn how to use these high-performance systems can be used for repair and retrofit projects.  Upon completion of the course, attendees will have the knowledge needed to design and implement high-performing, sustainable roofs for a wide range of construction projects.

Provider:  Situra, Inc.   www.situra.com

Program Title:

Provider Number:

Presentation Number:

Length:  60 min.

Credits:  1 LU

HSW (Health, Safety & Welfare):

Situra€™s learning objectives for you through this course is to understand the basics of expansion joints, calculate the anticipated movement within the joint as well as identify common problems encountered with expansion joints.  This course will also assist you to properly evaluate the different methods of waterproofing expansion joints in order to make the right decision during the design phase.

Provider:  Barrier One Concrete Admixtures

Program Title:  Concrete Enhancement Technology that Works for Construction Projects

Provider Number:  40107411

Program Number:  BOA-300

Length:  60 min.

Credits:  1 LU

HSW (Health, Safety & Welfare):  Yes

This course provides an in depth examination of the epidemic issue of new construction concrete slabs not being able to pass flooring and roofing field moisture testing guidelines in today’s compressed building cycle.   The ramification of such equates to an additional and often unbudgeted billion dollars plus a year being spent on expensive, disruptive, and time consuming moisture mitigation systems.  The root cause is embedded in the current flawed process for assessing slab moisture prior to final slab covering and is entrenched by the mistaken belief that, (1) new slabs can actually pass such tests within the construction schedule and (2), should the slabs pass that a warranty against a future moisture failure will convey.   This program reviews the magnitude of the problem, discusses the various causes, and offers proactive solutions that enable project teams to remove concrete moisture from the construction process effectively, efficiently and with liability truly mitigated.

Provider:  Knight Wall Systems  www.knightwallsystems.com

Program Title:  Rocket Science:  Understanding the Modern Cladding Attachment System

Provider Number:  L481

Presentation Number:  RS405

Length:  60 min.

Credits:  1 LU

HSW (Health, Safety & Welfare):  Yes

Knight Wall Systems enables owners and designers to easily and efficiently fulfill design demands while meeting the requirements of structural and thermal performance.  The single-source solution for pre-engineered, tested, rainscreen attachment systems with limited warranties help assure long-lasting performance in moisture management and increased energy efficiency.  Knight offers efficient mounting systems that accommodates nearly any facade or substrate type, from lap siding to terra cotta meeting, and exceeding, today’s high demands on thermal performance.

Provider:  Tclear Corporation  www.tclear.com

Program Title:  Concrete Faced Continuous Insulation Systems

Provider Number:  T037

Presentation Number:  T037CES01

Length:  60 min.

Credits:  1 LU

HSW (Health, Safety & Welfare):  Yes

This program provides an overview of design criteria used in designing energy efficient buildings using concrete faced continuous insulation systems for low-slope roofing, walls and foundations.

Provider:  Hughes & Associates    www.geolam.com

Program Title:  “Wood Aesthetic” Technologies for Retail and Mixed Use Projects

Provider Number:  L161

Presentation Number:  GL Retail 001

Length:  60 min.

Credits:  1 LU

HWS (Health, Safety & Welfare):  Yes

This course will provide an in-depth overview of current “wood” design technologies natural and synthetic used for retail and mixed use projects.

Provider:  Hughes & Associates    www.geolam.com

Program Title:  Wood Aesthetic For Cladding and Soffits

Provider Number:  L161

Presentation Number:

Length:  60 min.

Credits:  1 LU

HWS (Health, Safety & Welfare):  Yes

This course provides an in-depth overview of current “wood” design.

Provider:  Hughes & Associates   www.geolam.com

Program Title:  Understanding Technologies for Architectural Elements

Provider Number:  L161

Presentation Number:  GL 2020 AE 002

Length:  60 min.

Credits:  1 LU

HSW (Health, Safety & Welfare):  Yes

This course addresses basic technologies that are used for Architectural Elements such as sun screening, fins, brise soleil, baguettes, louvers, canopies, pergolas, etc.

QUESTIONS

 

 

What you view as a simple question may reveal much more to us that you may need to know. It may lead to more questions that you had not thought through. Go ahead and ask. We look forward to helping you out.

It would be helpful to have some basic information if you can.

Or, if you prefer, send us an e-mail with any attachments that may be helpful, nancycoddington@thomco1.com , or give us a call at 302-454-0361 or 800-334-0227 and our staff will connect you with a representative that will help you.

 

 

 

 

 

What you view as a simple question may reveal much more to us that you may need to know. It may lead to more questions that you had not thought through. Go ahead and ask. We look forward to helping you out.

It would be helpful to have some basic information if you can.

Or, if you prefer, send us an e-mail with any attachments that may be helpful, nancycoddington@thomco1.com , or give us a call at 302-454-0361 or 800-334-0227 and our staff will connect you with a representative that will help you.

 

 

 

 

 

What you view as a simple question may reveal much more to us that you may need to know. It may lead to more questions that you had not thought through. Go ahead and ask. We look forward to helping you out.

It would be helpful to have some basic information if you can.

Or, if you prefer, send us an e-mail with any attachments that may be helpful, nancycoddington@thomco1.com , or give us a call at 302-454-0361 or 800-334-0227 and our staff will connect you with a representative that will help you.

 

 

 

 

 

What you view as a simple question may reveal much more to us that you may need to know. It may lead to more questions that you had not thought through. Go ahead and ask. We look forward to helping you out.

It would be helpful to have some basic information if you can.

Or, if you prefer, send us an e-mail with any attachments that may be helpful, nancycoddington@thomco1.com , or give us a call at 302-454-0361 or 800-334-0227 and our staff will connect you with a representative that will help you.

 

 

 

X

4 + 1 =